craigslist | tools in portland, OR

HYDRAULIC PORTAPOWER SET AUTO BODY TOOL KIT JACK (port., or ) $150

2009-11-10T00:05:03-08:00

Industrial quality multi-purpose porta powers are used for automotive, truck, farm and heavy equipment repair. Features rust proof ram plunger and durable baked enamel protective finish provides long lasting life performance. High impact carrying case will keep kit together for safe storage. This porta power kit includes: Hydraulic ram, hydraulic pump, 6' long high pressure hose, ram toe, 2-3/4" flex head, plunger toe, spreader, serrated saddle, wedge head, male and female adapters, v-base, flat base, assorted extensions and storage case.

Jack Hose

Wedge Head

Spreader Ram

Male Connetor

Hydraulic Pump

Extension Tubes

Serrated Saddle

Flex Rubber Head

Blow-Molded Case

Spreader Ram Toe

Spreader Plunger Toe

If interested please call with any ?'s. 503-247-2906

Air tool set (Wilsonville) $90

2009-11-09T23:38:55-08:00

Nikota air tool set. Brand new. Never used.

Craftsman air compressor (wilsonville) $300

2009-11-09T23:37:31-08:00

Craftsman oilless air compressor. 6 Hp, 30 gal, 120 volts, single phase. Runs great.

Delta bench grinder (wilsonville) $75

2009-11-09T23:36:12-08:00

Delta bench grinder with wire wheel and grinding wheel. 1/4 hp, 3500 rpm, single phase. Comes with a heavy duty industrial stand. Runs great.

10' husky brand step ladder (willsonville) $125

2009-11-09T23:34:47-08:00

Husky brand 10' foot fiberglass step ladder in perfect condition. works great.

Rolling clamp rack (wilsonville) $50

2009-11-09T23:30:31-08:00

All metal rolling clamp rack. perfect shape.

Matco Tools Torque Wrench 1/2"Drive TRC150 1/2 Price NEW (Tigard) $155

2009-11-09T23:18:19-08:00

Beautiful Condition with no personal engravings. Been handled with care and shows very, very little use. Sells for $292 off the truck. Model TRC 150 - 10 -150 ft. lbs. & 10 - 200 Newton Meters. Serious Inquiries only please...it's already priced low and worth more.

Needs NO calibration and is ready to work.

You wont be disappointed! snap on mac

503-547-9950

$$$ SCAFFOLDING $$$ (se) $200

2009-11-09T23:08:45-08:00

Couple sets of scaffolding.
Call for more information: (503)473-4511.Nick
http://i627.photobucket.com/albums/tt357/nickkul/019.jpg
http://i627.photobucket.com/albums/tt357/nickkul/018.jpg

NEW Bostich 3 Tool Combo Pack (Hockinson) $200

2009-11-09T22:56:35-08:00

Brand New (Still in the Box) Bostich 3 Tool Finish & Trim Combo pack with Compressor:
* 2 HP 6 Gallon Oil Free Air Compressor
* 2 1/2" 16 Guage Straight Finish Nailer
* 1 1/4" 18 Guage Brad Nailer
* 1" 18 Guage Narrow Crown Stapler
* Accessories included:
- 1/4" X 40' Air Hose with Fittings
- Canvas Carrying Bag
- 3000 Fasteners (1000 Finish/1000 Brad/1000 Staplers)

snap on mig welder YA 240A (washougal) $1500

2009-11-09T22:41:19-08:00

this is a snap-on ya 240a welder, it it 230v has been used at home, never in a production shop so use is minumal and is in near perfect condition maybe a couple sratches here and there, this welder comes with everything to weld ie gas self darkening helmet cover an cord just plug in and go comes with the manual and assorted rollers for differant size wire,this weldr was $2600.00 new have another and just dont need two, $1500.00 obo if interested call me 360 903-7616 or 360 835-3519 ask for Steve thanks

Fiberglass Extension Ladder 20ft (Portland) $89

2009-11-09T22:34:18-08:00

Louisville fiberglass entension ladders 20ft. in great condition. used very little. Two to chose from or take both at a discount.
Contact 503-318-2336

20hp Air Compressor 120 gallon (PDX) $995

2009-11-09T22:31:14-08:00

Ingersol Rand 20 hp 3-phase power and auto tank drain. Call 503-572-3845

grinder (aloha)

2009-11-09T21:38:36-08:00

make your grinder portable and out of your way till you need it.
Bench Spacer Saver.
$44.95 for the complete system
$19.95 for additonal stinger to mount your other bench top tools on.
grinders,vise,polisher,wire wheel,small drill press,sander, small saw.

PITSBURGH Bolt Puller Set 46 pcs (Hazeldell, Vancouver) $30

2009-11-09T21:35:40-08:00

Many other tools.

See my other listings - key word: Zoran

Please, call Zoran at 360-901-3579 or 503-568-8818 (leave a message).

Brand New DalTool Tile Cutter 28" (Sunnyside Rd.) $350

2009-11-09T21:34:13-08:00

DalTool� Tile Cutters are designed for the precise cutting of Ceramic Tile 28" (Part # 9999 539488)Model.

Cutting Length Straight max. 28"
Cutting Length Diagonal Tile 19" x 19"
Cutting Height 1/4" - 7/8"
Breaking Power 1,300 lbs
Dimensions 37 1/2 x 12 1/2 x 5
Weight 30 lbs

includes
- 3/8" Scoring Wheel
- 18" Adjustable Tile Stop
- Angular Measuring Device 0� - 45�
- 2 Product Supports for Larger Tile
- Carrying Case
- Operating Instructions

Chop Saw Abrasive Rigid 14" (Washoual) $95

2009-11-09T21:33:29-08:00

Abrasive chop saw, Rigid 14" used on one job to cut 36 steel balusters Excellent condition 360- 607-5767

Dust Collector (Portland, OR) $275

2009-11-09T21:31:26-08:00

Two barrel dust collector with 3HP 220VAC motor. Sen Kong. Call Tom @ 503 522 2151

Drill Press (Portland, OR) $125

2009-11-09T21:30:48-08:00

20mm drill press with large table mounted on steel base plate. Foremost brand, 120 VAC. Call Tom at502 522 2151

Delta scroll saw (Portland, OR) $50

2009-11-09T21:29:54-08:00

24" older saw, needs some cleaning and rewiring and care. Call tom at 502 522 2151

Graco 5 to 1 Fluid Pump (Vancouver 98663) $50

2009-11-09T21:26:38-08:00

Air drive.Stanless steel 5/to/1 pump. I used it for spraying stripper. I am retired and selling things that I do not use any more. Max 360-903-2041

**craftsman 10" radial-arm saws (vancouver, wa) $150

2009-11-09T21:23:43-08:00

Wood, plastic and metalworking - over 200 operations. original manual included. Automatic electro-magnetic brakes, on-off switch. The saw shaft end and the accessory shaft end. The saw guard. Vertical, bevel, miter, compound miter, horizontal cross-cut. Vertiacal, bevel, horizontal in-rip. Vertical and bevel out-rip. Vertical routing. And so many more features. If you are in wood, plastic or metalworking, this one is for you.
Please, see my other listings. Key word: Zoran

Call Zoran at 360-901-3579 or 503-568-8818 (leave a message).

air compressor (battleground) $80

2009-11-09T21:23:00-08:00

3/4 hp,speedaire made by dayton, 360 263 6867

Tool sale!

2009-11-09T21:21:24-08:00

Air tool blow out 50% off all tools!! These tools (Neiko, Stanly)are brand new still in the box!! Call Sam for the details (503-925-0664)hours are 8to5 M-F and 10 to2 Saturday (Flexible hours by arrangement)

7PC 150mm Air Hammer Kit…

3-inch (Neiko) air cut-off tool…

20 PC screw driver kit…

17PC (Stanly) ½ inch socket set…

4PC (Neiko) Mechanic Pry bar set…

½ inch (ALP) impact wrench…

extension ladder (battleground) $35

2009-11-09T21:17:07-08:00

16 foot made in U.S.A. 200 lb like new,360 263 6867

Painters Power Roller (Milwaukie) $20

2009-11-09T21:10:02-08:00

Wagner Painters Power Roller Plus. Asking $20 or best offer. Also willing to trade if you have any offers. E-mail me or give me a call if you're interested. My e-mail is mcgomesftw@yahoo.com and my number is 503-250-3955 Thanks

Wagner 949 Pow-R-MAX Power Paint Roller - New

2009-11-09T21:04:52-08:00

This is a new Wagner 949 Pow-R-MAX Power Paint Roller

Description:
Battery powered power roller unit with 9 piece painting system.

Details:

* Applies up to 1-gallon of paint in 17 minutes
* Variable Flow Control
* ON/OFF Control on Roller Handle
* Holds up to 1.2 gallons
* 8 ft Paint Hose
* 9" Roller Cover
* Spatter Shield
* 3" X 5" Trim Pad
* 14" Extension minimizes the need for ladders
* Faucet Adapter for fast hose clean up This is a very handy feature
* Roller washer adapter for faster clean-up
* The Pow-R-MAX versatility:
Use with 4 D cell batteries (Optional: AC power adapter not included).
* Works with Latex or oil based paints

This unit is great for those who want the portability of a battery powered unit. And also comes with the nice accessories like the 14� extension and trim pad.

Price is $75.00

call 503 989-3405 for quicker response
or
email me via the above "Reply to" link by clicking on the link or copy the link and paste it onto your eMail

rigid wet/dry shop vac (ne portland) $50

2009-11-09T21:03:47-08:00

RIGID wet/dry shop vac
all tools and extension
$50 OBO

Motivated sale moving
Call Candice
971-678-6873

brand new construction tools (milwaukie) $70

2009-11-09T21:00:59-08:00

brand new construction tools,9 pairs safety glasses,3 hard hats,2 string lines,200 pair count box of ear plugs,caution tape despencer,34' inch bunge cord,2 marking sticks,1 clipboard,if interested please call chris at 1-503-952-6062

DRYWALL LIFT - Haul-Master -like new (Longview, WA) $300

2009-11-09T20:41:39-08:00

Like new Haul Master Model #95852 150 pound Drywall Panel Hoist. Reaches 9' to 15'. U-haul.
Call 360-747-3574

Craftsman Toolbox with Air Compressor ON SALE!!!! (Vancouver) $1200

2009-11-09T20:39:48-08:00

I HAVE THE TOOL BOX FILLED WITH VARIOUS TOOLS,GUAGES,WRENCHES ETC, AND IT INCLUDES THE AIR COMPRESSOR. I NEED TO SELL THIS SET, SO ONLY SERIOUS OFFERS PLEASE. CASH ONLY. THANKS.

34 ton woodsplitter (molalla)

2009-11-09T20:37:30-08:00

34 ton 10.5 motor reinforced rails very little use 1200.00 no pics yet

ALUMINUM LADDER BIG CHEAP FOR QUICK SALE (GRESHAM) $35

2009-11-09T20:36:43-08:00

IT IS LIKE 16 OR 18 FEET I AM REALLY BUSY AND HAVE NOT HAD A CHANCE TO MEASURE IT. IT REACHES 2 STORIES. LOOKING FOR QUICK AND EASY SALE PRICED AT HALF OF WHAT IT IS WORTH

503-663-3333

SOME ANSWERS TO POPULAR QUESTIONS TO SAVE US BOTH TIME SO ... PLEASE READ.........
PRICE IS FIRM NO OFFERS!
NO TRADES
NO I CANNOT DELIVER THESE TO YOU
NO THEY ARE NOT PERFECT NOTHING IS
CASH ONLY
YES IT IS STILL AVAILABLE, I WILL TAKE THE AD DOWN WHEN IT SELLS
WE ARE IN GRESHAM NEAR SANDY...SANDY THE CITY NOT THE STREET
NEEDS TO BE PICKED UP TUESDAY THE 10TH OR WEDNESDAY THE 11TH ONLY WE ARE MOVING!!!!

60 Gallon 5 HP Magna Force Air Compressor Needs Motor (Canby) $200

2009-11-09T20:32:33-08:00

Sanborn Magna Force 60 gal upright air compressor. Pump seems to be in good working order, the pump and pressure switch are missing. I think I have a pressure switch that will work. Just throw on a new motor and have a nice compressor for cheap. Asking $200, call David @ 503-348-7403

NEW CAMPBELL HAUSFELD AIR NAILERS 3 SIZES !! (GRESHAM) $99

2009-11-09T20:27:51-08:00

NEVER USED. BOUGHT THEM AT COSTCO FOR $199. DONT HAVE THE SALES SLIP AND WE BOUGHT THEM TOO LONG AGO TO TAKE BACK. THIS IS A STEAL.

503-663-3333

SOME ANSWERS TO POPULAR QUESTIONS TO SAVE US BOTH TIME SO ... PLEASE READ.........
PRICE IS FIRM NO OFFERS!
NO TRADES
NO I CANNOT DELIVER THESE TO YOU
NO THEY ARE NOT PERFECT NOTHING IS
CASH ONLY
YES IT IS STILL AVAILABLE, I WILL TAKE THE AD DOWN WHEN IT SELLS
WE ARE IN GRESHAM NEAR SANDY...SANDY THE CITY NOT THE STREET
NEEDS TO BE PICKED UP TUESDAY THE 10TH OR WEDNESDAY THE 11TH ONLY WE ARE MOVING!!!!

TOOLS AIR GUNS BRAD NAILER CONSTRUCTION

Sthil chain saw 044 (Washougal, WA) $550

2009-11-09T20:14:45-08:00

Stihl chain saw 044 with 28 inch bar in good condition.
Call 360-601-5602

Delta 12" Drill Press (Vancouver-Heights) $75

2009-11-09T20:12:42-08:00

Barely used: 12" Delta Drill Press $75.00
10" Craftsman Band Saw $15.00

more tools just ask

Craftsman Table Saw 10 inch (BORING) $100

2009-11-09T20:11:55-08:00

GREAT SHAPE 10 AMP MODEL CAST IRON TOP WITH EXTENTIONS AND CASTERS.
100.00
BRIAN
503-932-2087 CELL
503-663-9444 HM

Rockwell/Delta 24" Scroll Saw (Tualatin) $499

2009-11-09T20:01:00-08:00

Rockwell/Delta Model 44 as pictured. Serial # EL 874, With stand

This unit does work and is complete with everything except blades.

Check out the pics, this is a very nice unit.

Rockwell Motor, 1/3 HP, 115/230 V, 1725 RPM, Single phase

Call Andrew at 503-313-5936 or email acampnoway@yahoo.com

Craftsman Drill Press (Tualatin) $80

2009-11-09T19:58:12-08:00

Old drill press just sitting around.

Model 103.24531

It does work. Needs some TLC. Specifically cleaning of rust as you can see in pics.

On a stand with wheels for easy moving.

Call Andrew @ 503-313-5936
Offers will be entertained

MITUTOYO DIGITAL MICROMETERS (Milwaukie) $100

2009-11-09T19:57:10-08:00

These are three digital mics 0-1, 1-2 and 2-3 that have been inspected and certified as of November 2008. I am the original owner and only have the lower half of the box. Email if you have any questions. Local pickup & cash only ~ thank you.

Tire Changer Machine - Rim Clamp - For Motorcycles, Cars, or ATV's (SE Portland) $895

2009-11-09T19:56:51-08:00

Selling a Rim Clamp Tire Changer, mainly used for Motorcycles, but can be used for car & truck tires, as well as ATV tires. Clamping range is 8"-22". Excellent condition. 503-805-2684

Echo SRM-261T Trimmer (Tualatin) $275

2009-11-09T19:55:37-08:00

Echo SRM-261T Trimmer

SAVE $55.00

Normal Price for this trimmer was $329.99 Now only $275.00

The choice for commercial operators who want more cutting torque.

* Engine Displacement (cc): 25.4
* Carburetor: Rotary with Purge Pump
* Arbor Size: OPT/20mm
* Fuel Capacity: 19.6 fl oz
* See-Thru Fuel Tank: STD
* Shaft Length: 59"
* Starting System: Standard System
* Shaft Type: Straight
* Pro-Fire Electronic Ignition: STD
* Cutting Head: Echomatic
* Cutting Swath: 17"
* Shield: Std SRM
* Drive Shaft: 4-layer cable
* Nylon Line: 0.095 Crossfire
* Dry Weight: 11.7 lbs
* Warranty: 5 yr consumer, 1 yr commercial, 90 day rental

This trimmer is left over from a gone out of business dealer. It is brand new and CAN be registered for full Warranty. Trimmer has never had gas in it and comes with manuals and registration card.

Call Andrew @ 503-313-5936
or email me at acampnoway@yahoo.com

Sheet Metal Roll JET SR1650 50inch 16ga (NE Salem, OR) $1100

2009-11-09T19:50:33-08:00

Jet sheet metal roll Model SR1650 50 inch, 16 gauge mild steel and 20 ga;uge stainless steel, 3 rolls 3 inch diameter. 3 wire grooves. Comes with stand. Unit is new has been in barn. weighs approx. 600 lbs. $1100. Ph 5039322220 or email balerman4@comcat.net

Jet Floor Box & Pan Brake Model BP-1248N (NE Salem) $1650

2009-11-09T19:48:44-08:00

Jet floor Box & Pan Brake Model BP-1248N. Capacity 12 ga mild steel, 48"bending length, finger width 2, 3, & 4", Weight approx 1600 lbs Brake is new has never been used has been in barn collecting dust. $1650 Ph 5039322220 or email balerman4@comcast.net

Granite Slab $225

2009-11-09T19:47:12-08:00

Granite slab measures 17 1/2" wide, 60" long and 5 1/2" deep. $225 Ph 5039322220 or email: balerman4@comcast.net

Radial Arm Saw (Vancouver) $295

2009-11-09T19:44:49-08:00

Radial Saw made by Delta Rockwell Super 900

Serial # CR3422

Made in Pittsburg, PA

3450 RPMs

60 CYC

115/230 Volts

10.0/ 5.0 Amp

Frame 159Y Type SCS

Temp rise 40 c.

Also Included 2 Books: Getting the most out of your radial saw 1 and 2

* I will accept resonable offers also. Thanks for looking

POWER MIG WIRE FEED WITH NEW TANK (VANCOUVER) $200

2009-11-09T19:39:28-08:00

WORKS GREAT. PLUG IT IN AND START WELDING. JUST RAN OUT OF ROOM IN MY 1 CAR GARAGE. MY LOSS YOUR GAIN. 503-891-1647 MIGHT TAKE PART TRADE ON A SET OF 4 235/70/15 OR 30/9.50-15 MUST HAVE VERY GOOD TRACTION

Birdog Satellite meter $250

2009-11-09T19:33:13-08:00

New hardly used Birdog, updated. 250obo.

360 521 3963

Phase Converter 5 hp (Yamhill ) $425

2009-11-09T19:31:11-08:00

Brand New Under Warranty
Ready to be shipped out.
Call Lee 602-487-2744
visit Phoenixphaseconverter.com to get more info.

1/2 Dewalt Cordless Drill 14.4V (Hillsboro) $75

2009-11-09T19:17:53-08:00

Used Dewalt Cordless Drill 14.4v with two bateries,charger and case.
Please call 503-591-119

USED Screw Gun 55 SERIES w ROCKER 4000 rpm w Feed Track (Hillsboro ) $65

2009-11-09T19:17:00-08:00

Retail Price $317. OUR price $65!!! Call 503-591-1196
This complete tool kit comes with the SuperDrive 55 Series tool, a ROCKER 4000 RPM screw gun, a nose piece for Drywall, Decking and Subfloor applications, LOX� and Phillips bits.
� Use for any screw application from 1� - 2�
� Use with screw diameters from #6 - #12
� Simple design, easy to service
� Compact and lightweight industrial design
� SureLockTM fine depth control adjustment
� Extra long bit life with patented LOX bits
Recommended applications
� Drywall and Sheathing to Wood or Metal
� Metal to Metal
� Light or Heavy Gauge Metal
� Subfloor
� Wood to Wood

Used Weed Burners w Hose (Hillsboro) $40

2009-11-09T19:15:22-08:00

Have 2 weedburners with hose $40 each and extra heads $15 each. Call 503-591-1196

Kids Carpenters Tool set (Scappoose) $15

2009-11-09T19:04:18-08:00

Set includes hard hat, suspenders, tool belt, hammer, 10' tape, plastic ruler, plastic square, torpedo level, chalk line and chalk. Asking $15.00.

Nice Utility Trailer (Tigard/Beaverton) $495

2009-11-09T19:01:34-08:00

4' X 6' utility trailer, professionally made with a 2,000 lb. axle, all NEW plywood & paint, good tires & a spare tire. Tows easy & looks great!! $495 503-730-0506

TOOL BOX (Canby, OR) $150

2009-11-09T19:00:06-08:00

WARDS brand roll away toolbox and top box - roller is 29-1/4" tall X 17" deep X 26 3/4" wide, top box is 14-1/4" tall X 12-3/4" deep X 26" wide. Sell for $150 OBO or trade for??? CALL any day 9:00 to 9:00 -- 503-651-2770 or 503-706-1267
Looks a lot better than the photos since I cleaned off the dust. It has the key for the locks and everything works great!

Portable Cement Mixer (Lake Oswego) $300

2009-11-09T18:48:00-08:00

Almost new mixer does two 80 lb. bags at once. Only used on one job. Less than 12 hours on machine.
Please call Paul @ 503-705-4647

Tough Project Bench~3 Large Shelves~Top Tool Organizer~See Photo's! (or Best Offer~Portland~1st Come) $99

2009-11-09T18:45:22-08:00

Tough Project Bench~3 Large Shelves~Top Tool Organizer~See Photo's!
This is a CASH ONLY purchase of..$99. This has been greatly reduced from... $150. original asking Price. >> SEE PHOTO"S BELOW !

On 1st Come Basis!.. Reasonable Offer Considered

You can call: 503-329-0249 Please leave a contact phone number, if you e-mail! Easy to load, because of no stairs, and flat driveway back to storage area.

Automotive? Project & Parts Cart & Work Bench & Solid Stand

* 3 Shelves
* heavy-duty loads
* reinforced bracing
* Tool Tray organizer
* project area
* can easily attatch wheels, for optimum use
* Hurky
* Solid- Built
* Stands solid on floor, without attatching castors
* Has opening on legs for Castors...would be easy to do!
* Great for auto-parts, with tool organizer, for your project!
* A bill of sale can be provided for tax purposes, if you need one for work expenses.

Dimensions:
* 34 1/2" wide
* 39 1/2" high
* 26 1/2" deep
* 27" x 52" Bottom Shelf Base

Thanks for looking, & hope to hear from you!

Ridgid Oscillating belt sander (Gladstone) $149

2009-11-09T18:41:27-08:00

Ridgid EB44244 Oscillating Edge Belt Sander brand new, still in the box for sale. Come by and take a look or give us a call at (503) 656-0000.
20005 SE Mcloughlin Blvd
Gladstone, OR 97027

DEWALT CIRCULAR SAW (GLADSTONE) $89

2009-11-09T18:39:17-08:00

Dewalt DW368 7 1/4" circular saw in excellent condition is for sale. Come by and take a look or give us a call at (503) 656-0000.
20005 SE Mcloughlin Blvd
Gladstone, OR 97027

1/2" Impact Wrench (Hillsboro) $25

2009-11-09T18:39:17-08:00

DeVilbiss 1/2" Impact Wrench
Call Jim 503-539-4355

1000 watt work light (Hillsboro) $50

2009-11-09T18:37:59-08:00

Dual lights - 500 watts each
adjustable stand.

call Jim at 503-539-4355

"Bostitich"Quickdriver Auto-Feed Screwgun/Sturdy Metal Case~Like New! (Includes 2 Heavy Cases Of Screws~PDX) $225

2009-11-09T18:35:15-08:00

Bostitich"Quickdriver Auto-Feed Screwgun/Sturdy Metal Case~Like New! ~ INCLUDES: 2 Large Cases Of Auto-Feed Coil Screws.
REDUCED IN PRICE >>> $225. FOR ALL!

~~~~~~~ PHOTO"S BELOW.....SCHROLL DOWN TO BOTTOM!~~~~~~~~Reasonable Offer Considered ~~1st Come Basis
We have no use for it anymore, because our project fell through. It has been in the case ever since! It is like new.

Call: 503-329-0249....> Cash Only purchase, following Craigslist Guideline's. Please leave a phone number, if you e-mail us.

* Bostitch Quickdriver Automatic Feed Screwgun
* Includes Durable Metal Carrying Tool Case
* Used Once"~ ~ ~ Includes 2 cases of auto-feed, screws, in coil rolls, in PHOTO'S BELOW.
* 1 Case of 2 12" screws in coils ( 5 rolls ) Each roll worth $10.00 each. This as the sale price, at True Value Hardware.
* 1 Case of 1 3/4' screws in coils (12 rolls) Each roll worth $4.00 each. This was the sale price, at True Value hardware.
* Instruction Manual.
* We will not sell, just the cases of coil screws. Together, these 2 cases of coil screws, at half price would cost around $100! The sale price is displayed .

There is nothing at all wrong with this equipment. This was purchased at True Value Harware, when new. It is hardly used, and is basically brand new.

Thanks for looking, & Hope to hear back, from someone that can use this package deal!

1991 onan rv generator 4000w worksgreat ############################## (portland) $600

2009-11-09T18:24:37-08:00

1991 rv generator 4000w runs great 600.00 local sales only if you see this ad then it is still for sale !!!!! 503-666-6051

brake lathe ammco (tigard) $1595

2009-11-09T18:24:22-08:00

AMMCO BRAKE LATHE
WORKS GOOD
INCLUDES ALL ADAPTERS AND SILENCER BELTS
1595.00 obo
503 620-2676

!!!!!CARGO BOX!!!!!!! (VANCOUVER) $80

2009-11-09T18:22:00-08:00

FROM SEARS
LIKE NEW
NEVER USED IT
WANT 80 BUCKS FOR IT

Disc/Belt sander (Hazel Dell) $100

2009-11-09T18:02:49-08:00

Like new, only used twice disc/belt sander. Works great but has a broken table ledge where disc station is. New sand paper included.

Call Jeff at 360-433-1673 Mon-Fri 6:30am-8:00am and after 5:00 pm and sat and sun after 9:00 am

Craftsmen 10" Belt Drive Table Saw w/stand (Hazel Dell) $125

2009-11-09T17:59:31-08:00

Used Craftsmen 10" Belt Drive Table Saw w/stand, 2 Hp

Call Jeff at 360-433-1673 Mon-Fri 6:30am-8:00am and after 5:00pm and Sat and Sun after 9:00 am

8" Jet Grinder w/stand (Hazel Dell) $110

2009-11-09T17:57:10-08:00

Brand New jet 8" grinder w/stand

Call Jeff at 360-433-1673 Mon-Fri 6:30 am - 8:00 am and after 5:00 pm and Sat and Sun after 9:00 am

Rockwell Delta Unisaw 10" (Tigard,OR) $825

2009-11-09T17:56:35-08:00

This is the famous Rockwell Delta Unisaw that others were compared to. It includes a Biesemeyer fence. Used lightly by a hobbyist. Built to last. 503-579-6599

Drywall Cart (Portland, OR) $60

2009-11-09T17:56:12-08:00

Used in good condition. Shop dollies - $45.00 ea. Rolling table carts - $45.00 ea

Delta Boss Oscillating sprindle sander (Hazel Dell ) $200

2009-11-09T17:54:45-08:00

Brand new Delta Boss Oscillating spindle sander w/ stand and accessories. (Normally all of this would sell for up to $400.00)

Call Jeff Mon-Fri 6:30 am-8:00am and after 5:00 pm. Sat and Sun after 9:00 am at 360-433-1673

Air Compressor - 6hp 60gal Devilbiss Pro Air II $400

2009-11-09T17:51:02-08:00

Air Compressor - 6hp 60gal Devilbiss Pro Air II

Specs.

6hp motor with oil-free twin cylinder compressor

60gal vertical tank

240v/14a electrical requirement

125psi max pressure

14.6 scfm @ 40psi

11.1 scfm @ 90psi

64" tall

New Bosch Plunge Router (Hazel Dell) $120

2009-11-09T17:50:27-08:00

New Bosch Plunge Router ($120)with carrying case 1613EVS-11 amp,12,000-22,000rpm--1/4"collet and 1/2" collet and centering cone.Also comes with a router inlay kit and delux router guide(VERY GOOD DEAL FOR ONLY $120).

I have a bunch of NEW Bosch router bits that are super sharp and carbide tipped and some are super sharp,carbide tipped, with ball baring.I have the following bits...Two of the 1/8" Radius edge beading bits(1/4"collet) model#85631. A 3/8" dovetail bit(1/4"collet) model #84700. A 1/2"dovetail bit(1/4" collet)model#84703. A 3/16"radius edgebit(1/4"collet)model#85666. A 3/8"dovetail bit(1/2"collet)model #84706. A 1/4"radius edge beading bit(1/2"collet)model#85669. A 1/2"dovetail bit(1/2"collet)model#84709. A 3/4"dovetail bit(1/2:collet)model #84715.All of these bits and a few more will sell for over $200 but will Sell All Bits for $75(GREAT DEAL).

Also have other tools like a Porter Cable DoveTailMachine w/Stand($150),Used craftsman dual motion sander $15,A Skill buiscut jointer with case and100's of EXTRA buiscuts$50.A soldering gun for $10.A used Craftsmen 16" Variable Speed Scroll Saw, 5" plain blade holder cast iron base for $30.A used Wagner Pro Duty Power Painter for $10.Call for Jeff Mon.-Fri.6:30am-8:00am,and after 5:00pm. Sat. and Sun.after 9:00am. (360)433-1673

Shop vac (gladstone) $20

2009-11-09T17:50:04-08:00

Selling a dayton shop vac still in box, in great condition. Asking 20.00 OBO if interested please email or call 253-414-8269 or 503-333-1019

Wheel Alignment Machine (Newberg, Or.) $2200

2009-11-09T17:42:12-08:00

Hunter D111, recent updates and calibration. This is a complete turn key machine that needs nothing. Please call: 503-537-3939 Thanks Rick....

Jig Saw Craftsman LIKE NEW (Beaverton) $20

2009-11-09T17:41:11-08:00

I'm selling my Craftsman Jig Saw. Only used a few time and is in like new condition. Less than 6 months old, not a thing wrong with it.

Features durable Craftsman motor that delivers 800-3,000 spm, an integrated LED worklight to illuminate the work surface and a live tool indicator. Oversized blade clamp allows for quick and easy blade changes. Includes saw, 10 assorted blades, edge guide and carry case. Wt. 8.9 lbs.

Call or email if interested
503-568-2893

dewalt, skill saw, table saw, makita,

RE: Large oxygen/Acetylene Cylinder full (Gresham) $155

2009-11-09T17:39:20-08:00

Buyer beware This is a leased tank belonging to Airgas The picture has been examined by an airgas rep. Airgas may6 confiscate this tank if you try to fill it

1000+ hilti anchors (tigard) $100

2009-11-09T17:37:55-08:00

1/4 x4 good for wall furing or? call me 503 863 1030 tony might trde for gun or ammo

concrete mixer new in box! (gladstone) $10

2009-11-09T17:35:06-08:00

new in box! call 503 414 8269

the blue ox wood splitter (se pdx) $15

2009-11-09T17:32:10-08:00

It just needs 2 pipes for the guides. Give me a call at 503 206 9160 with any questions. Thanks Roger.

Cheverolet Shortbed Truck Rack (Milwaukie) $425

2009-11-09T17:28:31-08:00

Round Tube Steel truck rack with built in ratchet strap tie downs. Two tie downs on each side. Great for carrying lumber, ladders, or other long items.

Riged Portable Miter Chop Saw Stand (Gresham) $60

2009-11-09T17:28:24-08:00

This saw stand has performed well over the past couple of years I've owned it. This stand
was bought at Home Depot and anyone who knows tools, knows that Riged make high
quality tools. This stand is sturdy while in use and very stable while transporting and you
stow it away easily while the saw is mounted on stand while not in use. It's a must when shop
space is limited.

I'm asking $60 for this stand, but if you feel so inclined make me an offer.

Werner Aluma-Plank Scaffold Planks - Aluminum and Plywood - 7' (Close-SE) $50

2009-11-09T17:27:53-08:00

We have 2 total, only one shown in pictures, $50ea. The model number is 5307-19 and they are in solid used condition. They are currently sold new with discounts for $150 online. Thank you very much for taking a look, please remember to include a phone number in your response.

Coleman Powermate Generator (Hockinson) $300

2009-11-09T17:27:12-08:00

This is a Coleman Powermate generator that I used for about 100 hours. It puts out 5000 running watts/ 6500 peak watts and is powered by a 10 hp Subaru engine. I need to sell it fast so I am asking $300 or best offer. Please e-mail or call 360.882.3121. Thank you.

curtis-toledo D-96 compresor pump and motor (troutdale) $400

2009-11-09T17:24:24-08:00

This compressor was taken out of duty when the mounting plate on top of the tank broke. The pump turns good but I donot have 3 phase to try the motor. Included with the pump and motor is the pressure switch. I have one of these in my garage that I use with all my airt tools and it puts out 19.5 cfm at 175 psi. It will push alot more air with a 7.5hp motor and a larger pulley. I think the 7.5hp set up will put out 24 cfm at 175psi. I was also told by an aircompressor company that this pump will handle up to a 20hp motor. I have the owners manual for my compressor if you need any info. Thanks for looking Anthoney. Give me a call at 503 740 4420.

Tools & Machinery (North Portland)

2009-11-09T17:22:33-08:00

Fabrication shop quitting business - everything must go! Power hand tools, welders, work benches, milling machine, spot welder, bandsaw, huge press machine, brand new engine honing machine, bench grinders, lathe, steel, cabinets, desks, computer, file cabinets and much more. Big sale Saturday, November 14th. (Some items subject to prior sale). 9 am -3 pm 9751 N. Taft Ave., Portland, OR

Generator Generac 5000 Plus (Rainier, OR) $350

2009-11-09T17:20:03-08:00

Generac 5000 Plus generator, 220/110 outlets, runs good with very little use. Moved to new house and need larger generator, no longer need this one. Can deliver to Portland area. $350/0ffer. Stan (503) 308-3066.

devil biss air tank 80/100 gallon (se pdx) $50

2009-11-09T17:15:05-08:00

this tank is good but plate the motor and pump mount to is broken and needs to be welded or replaced. Give me a call at 503 206 9160 to see it. Thanks Roger. $50 obo.

stanely hydrolic rotor hammer (hubbard) $100

2009-11-09T17:11:11-08:00

brand new in the box call 971-563-1439

Scaffold - 2 Sets of Scaffolding (Close-SE) $120

2009-11-09T17:06:32-08:00

2 different sets available. First is the blue shown in the pictures, note that it shows 2 frames set up to make a single section. In the background you can see one more frame and 2 cross braces that are included for $125, this allows you to add the 3rd frame to the other 2 and have 2 side by side sections that are almost 16' wide in total. The blue are 5' tall. Shown in the last picture is a pair of 4' tall yellow frames that include 2 cross braces to make a single section, that set-up is $60 (also about 8' wide).Thank you very much for taking a look, please remember to include a phone number in your response. (we are also selling 2 aluminum and plywood planks by Werner - they are called Aluma-Plank Scaffold Deck model 5307-19 and are 7', they do not fit these sets as they are too short. They are $50ea)

Ryobi 18 Volt Circular Saw (Vancouver) $12

2009-11-09T17:01:10-08:00

I have three of these and only need one. The batteries are weak but still hold a charge.
Chuck (360) 574-7763

Cordless 3/8" Drill (Washington Square) $5

2009-11-09T16:57:48-08:00

Black and Decker 3/8 " cordless electric drill. Works fine. Great for small jobs. Am moving so no longer need it. Leave message of interest

Ryobi Table Saw - Barely Used (NE Portland) $185

2009-11-09T16:56:24-08:00

Ryobi Table Saw

Sliding table extension allows for a 30 In. right rip capacity, Sliding miter table with built-in miter gauge easily guides material for smooth and accurate cross cuts, Transportable fold-up stand allows for storage in workshops and mobility from one job site to another, Outfeed supports offers additional material support when making cuts.

Call or email if interested

503.890.4840

thanks!

radial arm saw (vancouver/fishers landing) $150

2009-11-09T16:56:19-08:00

Selling an older craftsman radial arm saw for my dad. It's been hanging out in my garage for far too long. If you're interested give Laura a call at 360-619-2573. $150 obo. Thanks!

Tool box for Pickups (Washington Square) $45

2009-11-09T16:52:50-08:00

Full size (70" long) TuffBox for storing tools, equipment, etc. in your pickup. In excellent condition as was never used in a pickup. $45 . . less than half the cost of a new one. Leave msg and contact information if interested.

lincoln sp-250 welder (tigard) $700

2009-11-09T16:24:28-08:00

i have owned this welder since it was new and now im moving and need to sale. i had a brand new motor put in it about 5 months ago and have only used it a few times since. and that ran me about 700 dollars. and it also comes with a owned bottle worth 200 dollars. so this is a fair price to ask, so please call cody at 541-420-7579, thanks

Used Solid Core Doors (Hillsboro) $50

2009-11-09T16:16:33-08:00

Have good assortment of solid core doors. All doors come with heavy duty hinges, metal door frame, and metal trim, door handels, some with locks. These doors are right and left swings. Most are 36'W, some 32'W and some 28"W and all 80'H. Complete kit for $50. Come and pick.
Call 503-591-1196

Skillsaw 7-1/4" Worm Drive (Hillsboro) $85

2009-11-09T16:15:14-08:00

Used. Completly refurbished with new blade and cord. Guaranteed. Price $85. Please call 503-591-1196

PASLODE Coil Nailer (HILLSBORO) $80

2009-11-09T16:14:12-08:00

CALL 503-591-1196
Works Faster - Three times faster than screws
� Holds Better - Nails have better holding power than other nails
� Adjustable Work Contacting Element - Convenience of depth of drive control on the tool, not at the compressor
� High Load Coil - 250 nails per coil means less downtime for reloading
� Single-Door Magazine-Makes nail loading easy and quick
For Remodeling:
o Floor Decking
o Roof Sheathing
o Wall Sheathing
o Shear Wall Diaphragms
Specifications
Model: 4250/65 CP-STL
Part Number: 403237
Weight: 7.1 lbs.
Height: 13 1/2 in.
Cycle Rate: 8 nails/second
Nail Capacity: 250
Air Req./100 p.s.i. (6.9 bar): .077/cycle
Op. Pres. p.s.i. (bar): 80-120 (5.5-8.3)

USED Paslode Positive Placement 5250/65 PP Fraiming Nailer (Hillsboro) $80

2009-11-09T16:13:11-08:00

CALL 503-591-1196
very good cosmetic and excelent working condition

retails is $369.00
Fast - Up to three times faster than hand nailing
Cost-Effective - Savings in labor costs pays for the tool right away
Durable and Reliable - Extended part life and fewer moving parts than other nailing systems
Accurate - Hardened probe accurately locates metal hardware hole and guides the fastener as it is driven, for Positive Placement of every nail, every time.
Automatic - Smart Lever(tm) system automatically adjusts to either 1-1/2" or 2-1/2" nail length