Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check, money order, shipping, escrow, or any promise of transaction protection/certification/guarantee. More info
0.030" over `64 327/365hp. Bore/rings/compression good. Strong motor. Includes mid `65 cast `461's in factory 2.02/1.60 form. They do have screw in studs (BBC type, 7/16"- on the rocker side, still typical 3/8" thread in head. Crane Energizer 1.6:1 alum roller rockers, O-size springs/seats and just the most minor of bowl and port work, primarily on the exh side & a 327/375hp solid lifter cam. Block was done by Larson & King way back and the heads more recently by Achie Somers (Somers Auto Machine). Very few mi, been sitting (inside) for some time. Complete w/Victor Jr, balancer, long h2o pump, car pan, cheap, but solid headers for early Camaro/Nova/Full-Size and possibly 2nd gen F-bodies, too- not bad, the plugs are easy! No carb or ignition (I needed those!), but I could supply if required. Does include $100+ set of 10.4 Taylor wires, routed under headers, blue and look like new. For what it's worth, I have 4+hrs labor into building that wire set and don't mind keeping. In fact, I'll sell the thing part or whole- but not the intake 1st! Been under bench for a few yrs, but Gaurentee it's a good engine, made good power to 6700rpm. No cracks, comp and oil press good, no vibrations/etc. Will dissassemble for serious buyer w/cash. Easily cost 3.5k+ to duplicate. Asking $2500 OBO. It is an orig `64 `Vette `365hp block- never been decked, but seemingly..... `Vette guys suck- no offense!- but it's a tight club. You'd think one of those guys would jump on it- I saw the same eng blk in Hemmings yrs bk and it was 3.5K just for a core eng. Why can't I find these guys?!
Trade up(possibly up) or down, depending for a BBC 4.500" Dart blk-new/used. Pt trade for good 396/427 aftermkt steel crank- this will be an older piece for sure, but somebody has a bunch! Richmond Road Race 5spd-new/used. Steel cowl hood scoop- aftermarket or salvagable from a `68-9 Camaro.
I have a `69 427/390hp M-21 4spd Impala for sale. Needs complete resto, but solid and VERY complete car. 10k, give or take/offer. It needs a good home and I won't have the money to restore for many years to come- just too many other projects and priorities. I've owned all this stuff and a lot more for many years, this is not a quick flip/etc. I need the space and $ to finish another project.
11am-10pm 503-309-5258 or 503-892-2840
Location: SW Portland
it's NOT ok to contact this poster with services or other commercial interests