Thanks for your consideration on this - shop table angled top for prints or drawings
drawing or hobby craft table
PLEASE look at all the pictures and read the whole ad carefully before emailing me with questions.
Has steel legs .
The table easily can come off and the legs would still stand.
The 2 legs on each end are connected.
The Table angle is adjustable to slightly different angles.
The table is a drafting table that has a angle to it.
7 foot 6 inches wide X 4 foot deep
the changeable slope right now is
37-1/4 inches high in the front
44-1/2 inches high in the back
In case you want a smaller top on it to save space
you can change to a smaller sheet of plywood.
The metal stand below is 4 foot 4 inches wide by 3 foot deep.
Table is 3/4 inch plywood
Little end separation on the plywood end on the right front.
It got wet but you can use it as is or put a new sheet on it.
It is drying out now.
Most drafting tables like this have a sheet of paper over the whole thing.
do NOT contact me with unsolicited services or offers