2000 mAh Tenergy 9.6v Tamiya (NiMH)
EZTec 9.6v (assuming about 2000 mAh but not marked) Tamiya (NiCd)
2x - 1200 mAh 7.4v Juzuxi JST connector (but has balance and one other 2pin connector as well) (LiPo)
600 mAh 7.4v Lectron Pro JST + balance connector (LiPo)
* These 3 LiPo batteries are new and have only been used to try to power on a quadcopter. Didn't get past that as main board on copter was bad and not worth troubleshooting further.