favorite
favorite
hide
unhide
flag

Posted

print

Mustang - $5,000 (Ocean Park, WA)

Mustang 1 thumbnailMustang 2 thumbnailMustang 3 thumbnailMustang 4 thumbnailMustang 5 thumbnailMustang 6 thumbnailMustang 7 thumbnailMustang 8 thumbnailMustang 9 thumbnailMustang 10 thumbnailMustang 11 thumbnailMustang 12 thumbnailMustang 13 thumbnailMustang 14 thumbnail
condition: fair
make / manufacturer: Ford
model name / number: Mustang
The car has a low mile 1990 EFI 460 with an overhauled Holley 650 double pumper, a stock C6 transmission, a 7.5 rear end and no driveline. Extras include a bare set of 1996 F3TE heads. a spare EFI intake, a 1996 California 460 Mass Air Computer with wiring harness and other related components. Also comes with a disassembled 8.8 axle housing, 3.31 gear set, rear sway bar and a spare trunk lid. The interior is okay and comes with a 5.0L 140-mph instrument cluster that has yet to be installed. About the intake, I installed stainless steel set screws into the lower portion of the injector bungs, used lock-tight and then lightly swaged them in place. I equalized all the intake port cross sectional areas within the first 1-2 inches of the port openings. The homemade carb adapter is a 1/2-inch-thick plate of 6061-T6 with 1/2-inch-thick phenolic spacer on top. The double roller timing chain is tight and looks like new and the camshaft lobes look good too. I checked all the pushrods, rocker arm fulcrums and valve stem tips, everything looks okay with lots of life left in them.

post id: 7758656344

posted:

updated:

best of [?]

loading
reading
writing
saving
searching